HP Storage Essentials NAS Manager Software - Manual (Page 148)

Discovering Applications, Backup Servers and Hosts 116
d. Delete the NetBackup or Data Protector server.
e. From HP SIM, delete the NetBackup or Data Protector server from the Systems list.
9. When you are done, click Save.
10. Restart the service for the management server for your changes to take effect.
While AppStorManager is restarting, users are not able to access the management server. The
AppStorManager service must be running for the management server to monitor elements.
11. Discover the host that is the HP Data Protector NetBackup Master Server as described in ” Step B
- Set Up Discovery for Hosts ” on page 116.
12. You can configure the management server to obtain information about your master backup
servers at a set interval.
Step B - Set Up Discovery for Hosts
You can discover your hosts by using two methods:
Discovery from HP SIM
1. Discover your hosts. Refer to the HP SIM documentation for more information. See Table 12 on
page 116.
2. Run Discovery Data Collection. See ” Step D - Obtain Details ” on page 121.
Use the following table as a guideline.
Table 12 (Discovery from HP SIM) Discovering Hosts
Step Description
1 If you have several hosts that use the same password and user name, set that
password and user name as the default. Use the Global Settings (Options >
Protocol Settings
> Global Settings) feature to set your default passwords.
Refer to the documentation that ships with SIM for more information.
2 Discover your host (Options > Discovery > Automatic).
One way to detect multiple IP addresses at once is to add an IP range for
scanning. The management server scans the IP range for elements and
populates the discovery list with element it could contact.
You can then discover those elements. See ”
Adding an IP Range for
Scanning ” on page 27 for more information.
3 Discovery Data Collection is required to obtain information from your
discovered elements. Discovery Data Collection takes some time. You might
want to perform this process when the network and the managed elements
are not busy. Click Options > Storage Essentials > Discovery > Run
Discovery Data Collection
.
See ” Step D - Obtain Details ” on page 121.