HP StorageWorks EVA Controller HSG V8.8 Software - Manual (Page 103)

Troubleshooting
103 Command Console V2.5 User Guide
To complete the Cluster Administrator Utility information:
1. Click your cluster group.
The resources in your cluster group appear.
2. Verify that your cluster group includes the quorum disk.
3. Right click the cluster group.
A drop-down menu appears.
4. Choose New, and then Resource.
The New Resource window opens.
5. Type the SWCC Agent's name and description. Under Resource Type,
choose Generic Service from the drop-down menu. Under Group, choose
Cluster Group.
6. Click Next.
The Possible Owners window opens.
7. In the Possible Owners field, select the nodes in your cluster where you want
the SWCC Agent to run.
8. Click Next.
The Dependencies window opens.
9. Choose the following resources: Cluster IP Address, Cluster Name, and
Quorum Disk.
10. Click Add to bring these resources online before starting the SWCC Agent.
11. Click Next.
The Generic Service Parameters window opens.
12. Type Steam in the Service Name field. Leave the Start-up Parameters field
empty.
13. Choose Use Network Name for computer name.
14. Click Next.
The Registry Replication window opens.
15. Click Finish.
A message stating that you have successfully created a generic service
resource is displayed.