HP StorageWorks EVA Controller HSG V8.8 Software - Manual (Page 94)

Troubleshooting
94 Command Console V2.5 User Guide
Your system may be configured to do one the following:
■ Check local hosts file first, and then go to DNS (most common setup for
Windows NT, Windows 2000, and Windows Server 2003).
■ Go to DNS first, and then check local hosts file.
■ Ignore DNS even if configured.
■ Ignore the local hosts file.
To determine your system configuration for Windows NT:
1. Right click Network Neighborhood (on the desktop).
2. Choose Properties.
3. Click the Protocols tab.
4. Choose TCP/IP, and then click Properties.
The Microsoft TCP/IP Properties window opens.
5. Click the WINS Address tab. If your computer uses DNS, the Enable DNS
for Windows resolution option is selected; you do not need to have Enable
LMHOSTS Lookup selected.
If WINS servers are available on the network, the LMHOST file can be used.
SWCC does not support WINS.
6. To determine the IP address for the system, click the IP Address tab in the
Microsoft TCP/IP Properties window.
7. To determine the full name of the system, click the DNS tab.
To determine your system configuration for Windows 2000, and Windows Server
2003:
1. Right-click My Network Places on your desktop.
2. Select Properties.
3. In the Network and Dial-up Connections window which opens, right-click
the connection to be used by SWCC.
4. Select Properties.
5. Select Internet Protocol (TCP/IP), then click Properties.
The Internet Protocol (TCP/IP) Properties window opens.
6. Click Advanced.
The Advanced TCP/IP Settings window opens.
7. Click the WINS tab.