HP Officejet 7410 All-in-One Printer User Manual
Page 161
1 Copper-colored contacts
2 Plastic tape with pink pull tab (must be removed before installing)
3 Ink nozzles under tape
Caution
Do not touch the copper-colored contacts or ink nozzles.
Touching these parts can result in clogs, ink failure, and bad electrical
connections.
7
Slide the new print cartridge down the ramp and into the empty slot. Push the print
cartridge forward until it clicks into place.
If the print cartridge you are installing has a white triangle on its label, slide the
print cartridge into the slot on the left. The latch is green with a solid white triangle
on it.
If the print cartridge you are installing has a white square or a white pentagon on its
label, slide the print cartridge into the slot on the right. The latch is black with a solid
white square and a solid white pentagon on it.
8
Press down on the latch until it stops. Make sure the latch catches below the bottom
tabs.
Chapter 15
158
HP Officejet 7300/7400 series all-in-one
Maintain your
HP
all-in-one