HP Officejet 7410 All-in-One Printer User Manual
Page 173
6
When prompted, press
1
for Yes or
2
for No.
Print a
Self-Test Report
to confirm the language and country/region:
1
Press
Setup
.
2
Press
1
, and then press
4
.
This selects
Print Report
, and then selects
Self-Test Report
.
The wrong measurements are showing in menus on the color graphics display
Solution
You may have selected the incorrect country/region when setting up your HP all-
in-one. The country/region you select determines the paper sizes shown on the
color graphics display.
To change the country/region, you must first set the default language again.
Usually, you set the language and country/region when you first set up the HP all-
in-one. However, you can change these settings at any time by using the following
procedure:
1
Press
Setup
.
2
Press
7
, and then press
1
.
This selects
Preferences
, and then selects
Set Language & Country/Region
.
A list of languages appears. You can scroll through the list of languages by
pressing the and arrows.
3
When your language is highlighted, press
OK
.
4
When prompted, press
1
for Yes or
2
for No.
The countries/regions for the selected language appear. Press or to
scroll through the list.
5
Use the keypad to enter the two-digit number for the appropriate country/
region.
6
When prompted, press
1
for Yes or
2
for No.
Print a
Self-Test Report
to confirm the language and country/region:
1
Press
Setup
.
2
Press
1
, and then press
4
.
This selects
Print Report
, and then selects
Self-Test Report
.
I received a message on the color graphics display to align the print cartridges
Solution
The HP all-in-one prompts you to align cartridges every time you install a new print
cartridge. For more information, see
.
Note
If you remove and reinstall the same print cartridge, the HP all-in-one will
not prompt you to align the print cartridges. The HP all-in-one remembers
the alignment values for that print cartridge, so you do not need to realign
the print cartridges.
I received a message on the color graphics display that the print cartridge
alignment failed
Cause
The incorrect type of paper is loaded in the input tray.
Chapter 16
170
HP Officejet 7300/7400 series all-in-one
Troubleshooting
information