HP Officejet 7410 All-in-One Printer User Manual
Page 172
Solution
This might mean the control panel overlay is not attached, or it is attached
incorrectly. Make sure to align the overlay over the buttons on the top of the
HP all-in-one and snap it firmly into place.
The color graphics display shows the wrong language
Solution
Usually, you set the language and country/region when you first set up the HP all-
in-one. However, you can change these settings at any time by using the following
procedure:
1
Press
Setup
.
2
Press
7
, and then press
1
.
This selects
Preferences
, and then selects
Set Language & Country/Region
.
A list of languages appears. You can scroll through the list of languages by
pressing the and arrows.
3
When your language is highlighted, press
OK
.
4
When prompted, press
1
for Yes or
2
for No.
The countries/regions for the selected language appear. Press or to
scroll through the list.
5
Use the keypad to enter the two-digit number for the appropriate country/
region.
User Guide
169
Troubleshooting
information