HP Network Storage Router m2402 User Manual
Page 101
Visual Manager User Interface
107
Network Storage Router M2402 User Guide
To open an FTP session:
1. Enter the User Name, Password, and the IP address of the router.
2. Click Connect.
3. Select the local file to upload or download. If necessary, click Browse to
scroll through a file list.
The following file types can be uploaded to the router:
■
Configuration (.cfg)
■
Firmware (.dlx)
The following file types can be downloaded from the router:
■
Configuration (.cfg)
■
Traces for the current boot cycle (curtrace.txt)
■
Traces from the previous boot cycle (prvtrace.txt)
4. Click Binary Transfer mode.
5. To download a file, click Get.
6. To upload a file, click Put.
Note:
If a valid firmware or configuration file is uploaded to the router, an automatic
reboot will occur once the file has been received. The router cannot be accessed from
the Visual Manager UI during the time that the reboot is in process, which is
approximately 30 seconds.