HP Network Storage Router m2402 - Manual (Page 99)

Visual Manager User Interface
105 Network Storage Router M2402 User Guide
■ Clear Assert Traces clears assert trace information.
■ Event Log Settings configures Event Log settings.
■ Event Log display shows the Event Log.
■ Clear Event Log clears the Event Log.
Each Utility Menu option is discussed in the following sections.
Beacon Mode Configuration
The Beacon Configuration screen is used to enable and disable the router Beacon
mode. When enabled, the Power LED located at the back of the router will
continuously blink, alternating between amber and green (see
Figure 57 ).
To enable the Beacon settings, select the ON checkbox and then click Submit.
Figure 57: Beacon configuration screen
Note: When the router is rebooted, beaconing is automatically disabled.