HP Network Storage Router m2402 - Manual (Page 146)

Serial/Telnet User Interface
152 Network Storage Router M2402 User Guide
Cloning the Current Map
In the Device Mapping Configuration menu, Clone Current Map (6) is used to
make an exact copy of the Current map.
Note: Auto Assigned maps and SCC maps cannot be cloned.
The new map must have a unique name.
After the cloning process is complete, this copy becomes the Current map.
Editing the Host List for the Current Map
In the Device Mapping Configuration menu, Edit Host List for Current Map (7)
is used to edit the host list for the Current map.
The Current map can be associated with hosts available in the host list on the same
port where the map is defined. Initially all hosts are associated with an Auto
Assigned map. These are ‘built at runtime’ hosts and cannot be edited or deleted.
Although the options are the same for FCP maps and SCSI maps, the screen
display differs.
Figure 87 and Figure 88 are examples of the Host List Display
screens for FCP and SCSI maps.
Figure 87: Host List Display for Fibre Channel maps