HP Network Storage Router m2402 - Manual (Page 22)

Introduction
28 Network Storage Router M2402 User Guide
Ethernet port LED definition:
Activity - Port activity
Link - Valid Ethernet link
Standby power button LED definition:
Green - System power is on
Amber - System fault condition is indicated
Alternating Green/Amber - System in Beaconing mode
Note: The Standby Power button engages/disengages system power supplied from the
power modules. This button does not remove power to the power module(s). To remove
power to the power module(s), unplug the router from electrical source.
The standby power button has a 10-second delay after disengaging power before
power can be re-engaged.
Serial Port
The router is equipped with one serial port (see Figure 8 ).
The serial port can be used to access the serial/Telnet user interface, which is used
to locally manage and configure the router.
Figure 8: Serial port