HP Network Storage Router m2402 - Manual (Page 157)

Serial/Telnet User Interface
163 Network Storage Router M2402 User Guide
For more information on controller LUN and Extended Copy commands, see
Appendix B , “Controller LUN Commands.”
The HP StorageWorks Network Storage Router M2402 supports and executes the
set of SCSI-3 commands listed in this Appendix. These commands can be
received as FCP commands over the FC bus and are supported by the Controller
LUNs. This document refers to these commands as Controller LUN commands.
Complete definitions of SCSI-3 commands can be found in the SCSI-3 standard
available from the American National Standards Institute (ANSI).”
For information about server-free backup, see Chapter 1 , “Introduction.”