Adding a host to the host list – HP Network Storage Router m2402 User Manual
Page 148
Advertising
Serial/Telnet User Interface
154
Network Storage Router M2402 User Guide
Adding a Host to the Host List
To add a host to the Host List, select Add (A).
If the host is an FCP host, the Host Name, Host ID, port WWN, and Node WWN
for FCP host must be entered. (WWN values are hexidecimal.)
is an example of the screen display when adding a host to the Host List
of a FCP host.
Figure 89: Adding a Host to the Host List - FCP host
If the host is a SCSI host, the host name and the initiator ID must be entered.
is an example of the screen display when a host is added to the Host List
of a of a SCSI host.
Figure 90: Adding a Host to the Host List - SCSI host
Advertising