HP Network Storage Router m2402 - Manual (Page 67)

Visual Manager User Interface
73 Network Storage Router M2402 User Guide
Ethernet Override Settings
To change the Ethernet override settings, click the override icon.
The Ethernet Override dialog box is displayed (see Figure 34 ).
Figure 34: Ethernet Override dialog box
MAC Address is the Ethernet physical address of the router.
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
The Ethernet physical address is always assigned by the manufacturer.
SNMP Configuration (not supported)
SNMP configuration is not supported.