HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 42)

EN Changing Settings in the Printer Control Panel 41
To configure the input trays
Follow the steps below to configure the media type.
1 Press M ENU until PAPER HANDLING MENU appears on the printer
control panel display.
2 Press I TEM until TRAY [number] TYPE = appears on the display.
3 Press -V ALUE + until the correct media type appears on the
display.
4 Press S ELECT to save the selection. An asterisk ( * ) appears to the
right of the selection.
To configure the media size in tray 1, repeat steps 1-4 (“size” will
replace references to “type”).
Note Trays 2, 3, and the optional tray 4 will automatically sense the media
size.
5 Repeat steps 2 through 4 to configure the media type in another
input tray.
- Or -
Press
G O to bring the printer online.