HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 43)

42 2 Using the Printer Control Panel EN
Selecting an Output Bin
Select the top output bin (face down) or the left output bin (face up) in
the printer control panel. The top output bin stacks the pages in
sequential order, so that the first page is on top and the last page is
on bottom. The left output bin provides a straight paper path which is
useful to prevent curling when printing on card stock, labels, or other
special media.
If you have an optional multi-bin mailbox, an optional 3000-sheet
Stacker, or an optional 3000-sheet Stapler/Stacker, then select the
appropriate output bin as your default. To configure other available
modes, see your network administrator.
Note For more information on the optional multi-bin mailbox, the optional
3000-sheet Stacker, and the optional 3000-sheet Stapler/Stacker
modes, see the guides that came with them.
Select the default destination for print jobs in the printer control panel.
The printer will send print jobs to the default destination if a
destination is not selected in the printer driver, or if your printing
environment does not use printer drivers. For more information on
using the HP Web JetAdmin software, see the online help.
Note Changes made to the multi-bin mailbox mode settings in the printer
driver will not override the multi-bin mailbox mode set in the
HP Web JetAdmin software or through PJL commands.