HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 85)

84 3 Common Printing Tasks EN
Printing from Tray 4 (some printer models only)
Load up to 2,000 sheets of 20 lb
(75 g/m
2
) bond paper in tray 4.
To load media into tray 4
1 Firmly grip the handle in the center of
the input tray, squeeze the release
lever, and pull the input tray out until it
stops.
Note
To use the media size currently
configured in the input tray, go to step 5.
To use a different size, go to step 2.
2 Adjust the front media guide by
pulling up on the pin (A), placing the
media guide into the slots on the top
and bottom of the input tray that
correspond to the media size you are
loading (B), and pushing in the pin.
3 Repeat step 2 to adjust the back
media guide.
4 Repeat step 2 to adjust the left media
guide.
Note
For 11-by-17 inch media, move the left
media guide to the back of the input tray.