HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 44)

EN Changing Settings in the Printer Control Panel 43
To select an output bin
1 Press M ENU until PAPER HANDLING MENU appears on the printer
control panel display.
2 Press I TEM until PAPER DEST = appears on the display.
3 Press -V ALUE + until the correct destination appears on the
display.
4 Press S ELECT to save the selection. An asterisk ( * ) appears to the
right of the selection.
5 Press G O to bring the printer online.
Setting Media Type and Size Overrides
Set the media override option to select the media on which a job will
print if the selected media is not available.
To set the media override
1 Press M ENU until PAPER HANDLING MENU appears on the printer
control panel display.
2 Press I TEM until AUTO PAPER OVERRIDE appears on the display.
3 Press -V ALUE + until the ON or OFF appears on the display.
• ON —If the requested media is not found, TRAY X LOAD <Type>
<Size> will appear on the display. There will be a delay before
the printer automatically prints on plain paper on the default
media size (set in the
PRINTING MENU on the printer control
panel). The delay time can be configured through the
HP Web JetAdmin software. For more information on
configuring HP Web JetAdmin software, see the associated
online help file.
• OFF — TRAY X LOAD <Type> <Size> will appear on the display.
The printer will not print until it detects the correct media type
and size or
G O is pressed.