HP 9000 Virtual Library System - Manual (Page 90)

Figure 2 Base and Capacity Enclosure Front Panel LED Status – Normal Operation
LED state LED Location Item
Off or blue Status (blue or yellow) Hard drives 1
On or blinking Power/Activity (green) 2
Off Fault/Service Required Right ear 3
On Power On/OK 4
NOTE: The hard drive LEDs may not immediately illuminate when the enclosure is powered on.
The LEDs illuminate after the hard drives are configured by the VLS firmware.
Figure 3 VLS9000 Base Enclosure Rear Panel LED Status – Normal Operation
LED state LED Location Item
On AC Power Good (green) Power module 1
Off DC-Fan Fault/ Service Required (yellow) 2
On FC link status (L) (green) RAID controller 3
On FC link speed (S) (green) 4
Off Fault/Service required (yellow) 5
On Power On/OK (green) 6
On Ethernet link status (green) 7
On Expansion port status (green) 8
90 Operation