HP Secure Key Manager - Manual (Page 196)

Figure 106 Viewing the Create Cluster section
The following table describes the components of the Create Cluster section.
Table 87 Create Cluster section components
Description Component
The IP of the current device. If the device has multiple network interfaces, the pull-
down menu lists all available interfaces.
Local IP
The port on which the device listens for cluster administration requests.
CAUTION:
The cluster port (typically 9001) must be different from the KMS Server port
(typically 9000).
Local Port
The password for the cluster. The requirements for the cluster password depend on
your Password Management Settings. For information on password requirements,
refer to
Password Constraints .
Cluster Password
Re-enter the cluster password.
Confirm Cluster Pass-
word
Click Create to create the cluster. A new cluster key is internally created, and this
device appears in the Cluster Members list.
Create
Join Cluster
Use this section to add the device to an existing cluster. You must know the IP and port number of
another member of the cluster, and you need a local copy of the cluster key and the cluster password.
A device can be a member of only one cluster.
Using the Management Console 196