HP Secure Key Manager - Manual (Page 319)

hostname# show license
Licenses: 5
Syntax
• show license usage
Related com-
mand(s)
show license usage – show the number of licenses currently in use.
hostname# show license usage
Client IP Address Number of Connections
===============================================
192.168.1.89 2
192.168.1.91 2
192.168.200.101 5
Syntax
• show license
Related com-
mand(s)
show statistics – view statistical information on the operation of the SKM.
hostname# show statistics [refresh interval]
NOTE:
The refresh interval is an optional parameter to specify how frequently the statistic
information should be updated. The default value for the refresh interval is 3 seconds.
The value specified from the CLI does not affect the refresh interval on the Management
Console. The show statistics command displays the system statistics by default;
however, you can also view the Throughput Statistics, and the KMS Server Statistics
by pushing 2 or 3 respectively. Push the spacebar to update the statistics immediately.
Push q to return to the command prompt. Push 1 to return to the System Statistics.
Syntax
None
Related com-
mand(s)
System commands
clock set – set the date, time, and time zone for the SKM.
hostname (config)# clock set <mm/dd/yy/ hh:mm:ss timezone>
NOTE:
See Table 142 for further information.
Syntax
• show clock
• timezone set
Related com-
mand(s)
edit ras settings – edit the Remote Administration Settings.
NOTE:
If you make changes to the remote administration settings via secure shell, you will be logged out of
your secure shell client after you have entered all the necessary information.
Secure Key Manager 319