HP Secure Key Manager - Manual (Page 44)

3. In the KMS Server Settings section of the window, click Edit. The following warning may display.
4. Configure the KMS Server Settings as shown. (Ensure that the port and connection timeout settings
are 9000 and 3600, respectively). For Server Certificate, select the name of the certificate you
created in
Creating the SKM server certificate , step 4. For example, SKM Server .
5. Click Save.
IMPORTANT:
Please apply the most recent security patch(es) to ensure maximum security.
Receive support alerts, driver updates, software, firmware, and customer replaceable components,
in your E-mail through HP Subscriber's Choice. Sign up for Subscriber's Choice Driver, Patch, Security,
and Support alerts at the following URL:
http://www.hp.com/go/myadvisory
Establishing a cluster
The procedures in this section will establish a cluster configuration on one SKM appliance and then
transfer that configuration to the remaining appliances.
• In Creating the cluster , the cluster is created on one SKM appliance.
Skip this section if you already have an SKM cluster.
• In Copying the Local CA certificate , the Local CA certificate from an existing cluster member is
copied into the copy buffer in preparation for pasting it into the management console of each of
the SKM appliances that will be added to the cluster in
Adding SKM appliances to the cluster .
Start here if you are replacing an SKM or expanding an existing cluster. When replacing an ap-
pliance or expanding the cluster, any of the existing cluster members may be used to transfer the
cluster configuration.
• In Adding SKM appliances to the cluster , each of the additional SKM appliances will be added
to the cluster.
Start here if you already have a cluster and the Local CA certificate from
Copying the Local CA
certificate is still available in your copy buffer.
If you only have one SKM appliance, skip Establishing a cluster and continue with Propagating
third-party certificates .
Creating the cluster
To create the cluster, perform the following steps on one of the SKM appliances to be clustered:
Configuring the system 44