HP Secure Key Manager - Manual (Page 76)

5. If using SSL, select Use SSL and enter the Trusted Certificate Authority.
6. Enter the number of seconds to wait for the LDAP server during connections in the Timeout field.
7. Enter the Bind DN (distinguished name) and Bind Password.
8. Click Save.
Testing the LDAP administrator server connection
To test the LDAP administrator server connection:
1. Log in to the SKM appliance as a Local administrator with High Access Administrator access
control.
2. Navigate to the LDAP Administrator Server Properties section of the Administrator Configuration
page (Device > Administrators > LDAP Administrator Server).
3. Click LDAP Test.
Setting up the LDAP schema
To set up the LDAP Schema:
1. Log in to the SKM appliance as a Local administrator with High Access Administrator access
control.
2. Navigate to the LDAP Schema Properties section of the Administrator Configuration page (Device
> Administrators > LDAP Administrator Server).
3. Click Edit.
4. Enter the values for your LDAP schema. All fields are required except User List Filter.
5. Click Save.
Setting up the LDAP failover server
To set up the LDAP Failover Server:
1. Log in to the SKM appliance as a Local administrator with High Access Administrator access
control.
2. Navigate to the LDAP Failover Server section of the LDAP Administrator Configuration page
(Device > Administrators > LDAP Administrator Server).
3. Click Edit.
4. Enter the Failover Hostname or IP Address and Failover Port.
5. Click Save.
Testing the LDAP failover server connection
To test the LDAP Failover Server Connection:
1. Log in to the SKM appliance as a Local administrator with High Access Administrator access
control.
2. Navigate to the LDAP Failover Server section of the LDAP Administrator Configuration page
(Device > Administrators > LDAP Administrator Server).
Performing configuration and operation tasks 76