HP Secure Key Manager - Manual (Page 207)

Figure 115 Viewing the Network Interface Port Speed/Duplex section
The following table describes the components of the Network Interface Port Speed/Duplex section.
Table 96 Network Interface Port Speed/Duplex section components
Description Components
Select from the following options:
• Auto-Negotiate
• 10 Mbps/Half Duplex
• 10 Mbps/Full Duplex
• 100 Mbps/Half Duplex
• 100 Mbps/Full Duplex
Ethernet #1/ Ether-
net #2
Click Edit to modify the Network Interface Port Speed/Duplex settings. Edit
IP Authorization sections
The IP Authorization feature allows you to specify which IP addresses are permitted to connect to the
SKM and which services those IP addresses may access.
Once enabled, the SKM examines each network packet sent to the protected TCP ports. Authorized
packets are processed; unauthorized packets are dropped and logged. You can view the unauthorized
packets in the system log.
The Network Configuration page contains the following IP Authorization-related sections:
• IP Authorization Settings
• Allowed Client IP Addresses
IP Authorization Settings
IP Authorization settings are viewed and modified from the IP Authorization tab on the Network
Configuration page. Use the IP Authorization Settings section to view and set these settings for SKM.
Secure Key Manager 207