HP Secure Key Manager - Manual (Page 75)

1. Configure the agent at the SNMP Agent Settings section.
2. Create an SNMPv3 username at the SNMPv3 Username List section to enable the NMS to access
the Enterprise MIBs.
3. Define an NMS at the Create SNMP Management Station section if you want the SKM to initiate
trap messages to the NMS. The fields required for defining an SNMPv3 NMS depend on the
combination of authorization and privacy you choose.
Administrator procedures
Creating an administrator
To create an administrator account:
1. Log in the Management Console as an administrator with Administrators access control.
2. Navigate to the Create Administrator section on the Administrator Configuration page (Device
> Administrators > Administrators).
3. Enter values in the Username, Full Name, Description, and Password fields.
4. Confirm the password in the Confirm Password field.
5. Select the access controls for the administrator account.
6. Click Create.
Deleting an administrator
To delete an administrator account:
1. Log in the Management Console as an administrator with Administrators access control.
2. Navigate to the Administrator List section on the Administrator Configuration page (Device >
Administrators > Administrators).
3. Select the administrator and click Delete.
4. Confirm the action on the Secondary Approval section.
LDAP Administrator server procedures
This section describes the procedures you will follow when managing LDAP administrator servers.
Setting up the LDAP administrator server
To set up the LDAP Administrator Server:
1. Log in to the SKM appliance as a Local administrator with High Access Administrator access
control.
2. Navigate to the LDAP Administrator Server Properties section of the Administrator Configuration
page (Device > Administrators > LDAP Administrator Server).
3. Click Edit.
4. Enter the Hostname or IP Address and Port.
Secure Key Manager 75