HP Officejet 100 Mobile Printer - L411a - Manual (Page 100)

computer. Make sure to remove them correctly using the uninstall utility provided when you
installed the HP software.
There are three methods to uninstall the HP software on a Windows computer, and one method to
uninstall on a Macintosh computer.
To uninstall from a Windows computer, method 1
1. Disconnect the printer from your computer. Do not connect the printer to your computer until
you are prompted to do so by the HP software during the reinstall.
2. On the Windows taskbar, click Start, select Programs or All Programs, select HP, select the
printer name, and then click Uninstall.
3. Follow the onscreen instructions.
4. If you are asked whether you would like to remove shared files, click No.
Other programs that use these files might not work correctly if the files are deleted.
5. Restart the computer.
6. To reinstall the HP software, insert the HP software CD into the computer's CD drive, follow
the onscreen instructions.
7. Connect the printer when the HP software prompts you to connect it to the computer.
8. Press the Power button to turn the printer on.
After connecting and turning on the printer, you might have to wait several minutes for all of
the Plug and Play events to complete.
9. Follow the onscreen instructions.
When the HP software installation is complete, the HP Digital Imaging Monitor icon appears in
the Windows system tray.
To uninstall from a Windows computer, method 2
NOTE: Use this method if Uninstall is not available in the Windows Start menu.
1. Disconnect the printer from the computer.
NOTE: It is important that you disconnect the printer before restarting your computer.
Do not connect the printer to your computer until you are prompted to do so by the HP
software during the install.
2. On the Windows taskbar, click Start, select Settings, select Control Panel, and then click
Add/Remove Programs.
- Or -
Click Start, click Control Panel, and then double-click Programs and Features.
3. Select the printer name, and then click Change/Remove or Uninstall/Change.
Follow the onscreen instructions.
4. Restart the computer.
5. Insert the HP software CD into the computer's CD drive and then start the Setup program.
6. Follow the onscreen instructions.
To uninstall from a Windows computer, method 3
NOTE: Use this method if Uninstall is not available in the Windows Start menu.
1. Insert the HP software CD into the computer's CD drive, and then start the Setup program.
2. Disconnect the printer from your computer. Do not connect the printer to your computer until
you are prompted to do so by the HP software during the reinstall.
3. Select Uninstall and follow the onscreen directions.
4. Restart the computer.
5. Start the Setup program for the printer again.
Appendix D
96 Printer management tools