HP Officejet 100 Mobile Printer - L411a - Manual (Page 25)

NOTE: If you are using a mobile phone running Windows Mobile, you can use the
HP software CD to install the printing software.
For a list of mobile phones and printing software, as well as information about obtaining
the software, see Mobile phone printing information.
Maintain the printer
The printer does not require scheduled maintenance, except for replacing the ink
service module. For more information, see Replace the ink service module. You should
attempt, however, to keep the printer free of dust and debris. This cleaning keeps the
printer in peak condition and might also make the diagnosis of problems easier.
WARNING! Turn off the printer and unplug the power cord before cleaning the
printer. If using the optional battery, turn off the printer, unplug the power cord and
remove the battery before cleaning.
This section covers the following topics:
•
Clean the printer
Clean the printer
When you clean the printer, follow these guidelines:
•
Clean the outside of the printer with a soft cloth moistened with mild detergent and
water.
NOTE: Clean the printer only with water or water mixed with a mild detergent.
Using other cleaners or alcohol can damage the printer.
• Clean the inside of the front access cover with a dry, lint-free cloth.
CAUTION: Be careful not to touch the rollers. Skin oils on the rollers can
cause print quality problems.
Turn off the printer
Turn off the printer by pressing the (Power) button located on the printer. Wait until
the power light turns off before unplugging the power cord or turning off a power strip. If
you turn the printer off incorrectly, the print carriage might not return to the correct
position causing problems with the ink cartridges and print quality issues.
Turn off the printer 21