Install and use the battery, Battery safety – HP Officejet 100 Mobile Printer - L411a User Manual
Page 21
1. Lift the input tray.
2. Slide the paper width guide out as far as possible.
NOTE: If you are loading larger-sized media, pull the input tray to extend it.
3. Insert the media print-side up and align it squarely against the paper guide.
NOTE: Do not load paper while the printer is printing.
4. Adjust the paper width guide so it fits snugly against the sides of the paper.
Install and use the battery
The lithium-ion rechargeable battery comes with the HP Officejet 100 Mobile Printer in
some countries/regions and is available for purchase as an optional accessory in other
countries/regions. For more information, see HP supplies and accessories.
This section contains the following topics:
•
•
•
Battery safety
•
Use only the battery designed specifically for the printer. For more information, see
HP supplies and accessories and Printer specifications.
•
When discarding a battery, contact your local waste disposal provider regarding
local restrictions on the disposal or recycling of batteries. Though the lithium-ion
rechargeable battery is mercury-free, it might require recycling or proper disposal at
end-of-life. For more information, see Recycling program.
•
The battery might explode if incorrectly replaced or disposed of in fire. Do not short-
circuit the battery.
•
To purchase a replacement battery, contact your local dealer or HP sales office.
For more information, see HP supplies and accessories.
•
To avoid risk of fire, burns, or damage to the battery, do not allow a metal object to
touch the battery contacts.
•
Do not disassemble the battery. The battery has no serviceable parts inside.
•
Handle a damaged or leaking battery with extreme care. If you come in contact with
the electrolyte, wash the exposed area with soap and water. If it contacts the eye,
flush the eye with water for 15 minutes and seek medical attention.
•
Do not charge, store, or use the battery in places where the temperature exceeds
the limits specified in Operating environment.
Important notes
Take note of the following when charging or using the battery:
•
Charge the battery for 4 hours before using the battery for the first time. For
subsequent charges, it takes approximately 3 hours to fully charge the battery.
•
The battery charge light is amber when the battery is charging. If it is red, the
battery might be faulty and need to be replaced.
Install and use the battery
17