HP Officejet 100 Mobile Printer - L411a - Manual (Page 72)

Light description/Light pattern Explanation and recommended action
three seconds, the left ink cartridge light is on,
and right ink cartridge light is blinking.
Power light blinks, Resume light blinks. After
pressing and holding the (Cancel button) for
three seconds, the left and right ink cartridge
lights are blinking. Ink service module is full.
The replaceable ink service module holds
waste ink from the black ink cartridge. The
ink service module is now full. The printer
will not be able to print with the black ink
cartridge until the ink service module is
replaced . Contact HP support to obtain a
new module. For more information, see HP
support.
If you have a new ink service module, install
it immediately by following the instructions
that came with the module.
TIP: When the ink service module is full,
the printer stops printing. However, until the
replacement arrives, you can continue
printing by removing the black ink cartridge
and printing with just the tri-color ink
cartridge. Color results and print speeds,
though, might be affected. For more
information about printing with a single ink
cartridges, see Print with a single ink
cartridge.
For more information, see Replace the ink
service module.
Chapter 4
(continued)
68 Solve a problem