HP Designjet 5100 Printer series - Manual (Page 32)

2-8
Load and unload material
HP Designjet 5100 printer Customer Reference Guide
13 The front panel displays:
14 Take hold of the edges of the printing
material now extending from the exit slot
and pull the material toward you until taut.
Then align the left and then the right
edges of the material, so that they are
aligned with the edges of the roll.
15 When the printing material is correctly aligned with the edges of the roll,
lower the lever.
If the window is open, the front panel
displays:
16 Lower the window.
17 The printer checks the alignment of the printing material.
18 If the printing material is correctly aligned,
the printer will display:
19 Select "Yes" and press the Enter key.
20 The front panel displays various vendors of
printing materials if they have been
downloaded. See the Using Your Printer
CD for more details. Select the vendor of
the material you are using. Press the Enter
key.
21 The front panel displays various printing
materials: