HP Designjet 5100 Printer series - Manual (Page 43)

2-19
Load and unload material
HP Designjet 5100 printer Customer Reference Guide
using that profile. It takes about nine minutes to print a sample, depending
on the print mode and the printing material.
RGB sample
CMYK sample
If you are unsure which profile to choose, you can print samples using
several different profiles and decide for yourself which gives the best print
quality.
Many of our customers prefer high-grammage printing materials (about 170
g/m²), and there is a generic media profile best suited to such materials.
Choose Heavyweight Coated, and then HW Coated 2. This profile is
designed to give particularly good quality, especially in Production mode.
In some cases it may be possible to select Production mode although the
non-HP printing material is not compatible with Production mode. In such
cases the printer will print in Productivity mode.
Media length tracking
The media length tracking function enables the printer to register through the
front panel how much printing material is left on the roll you are using.
To turn on the function
1 Go to the Printer Setup menu and press
Enter :
2 The front panel displays: