HP Array Controller HSG V8.7 Software - Manual (Page 437)

Event Reporting: Templates and Codes D–3
Last Failure Event Sense Data Response
Unrecoverable conditions detected by either software or hardware and
certain operator-initiated conditions result in the termination of HSG80
controller operation. In most cases, following such a termination, the
controller will attempt to restart (that is, reboot) with hardware
components and software data structures initialized to the states
necessary to perform normal operations (see Figure D–2).
n Instance Codes (byte offset 32-35) are described in Table D–1,
“Instance Codes” on page D–18.
n ASC and ASCQ codes (byte offsets 12 and 13) are described in
Table D–7, “ASC and ASCQ Codes” on page D–85.
n Last Failure Codes (byte offset 104-107) are described in Table
D–3, “Last Failure Codes” on page D–38.