Enable memory, Enable memory for windows, Check dimm installation – HP Color LaserJet Professional CP5225 Printer series User Manual

Page 100: Clean the product

Advertising
background image

Enable memory

If you installed a memory DIMM, set the printer driver to recognize the newly added memory.

Enable memory for Windows

1.

On the Start menu, point to Settings, and click Printers or Printers and Faxes.

2.

Select this product, and then select Properties.

3.

On the Configure tab, click More.

4.

In the Total Memory field, type or select the total amount of memory that is now installed.

5.

Click OK.

Check DIMM installation

Turn the product on. Check that the product is in the Ready state after it has gone through the startup
sequence. If an error message appears, do the following:

1.

Print a configuration page. See

Information pages on page 66

.

2.

Check the Installed Personalities and Options section on the configuration page and compare it
with the configuration page that you printed before the DIMM installation.

3.

The DIMM might not be installed correctly. Repeat the installation procedure.

-or-

The DIMM may be defective. Try a new DIMM.

Clean the product

During the printing process, paper, toner, and dust particles can accumulate inside the product. Over
time, this buildup can cause print-quality problems such as toner specks or smearing. This product has
a cleaning mode that can correct and prevent these problems.

Clean the product using HP ToolboxFX

1.

Open HP ToolboxFX. See

Open HP ToolboxFX on page 67

.

2.

Click the System Settings folder, and then click the Service page.

3.

In the area for Cleaning Mode, click the Start button to begin the cleaning process.

The product processes a single page, and then returns to the Ready state when the cleaning
process is complete.

Clean the product using the control panel

1.

Press the

OK

button to open the menus.

2.

Press the arrow buttons to highlight the Service menu, and then press the

OK

button.

3.

Press the arrow buttons to highlight the Cleaning Mode menu, and then press the

OK

button.

4.

Follow the control-panel instructions to complete the process.

88

Chapter 9 Manage and maintain

ENWW

Advertising