HP Color LaserJet Professional CP5225 Printer series - Manual (Page 24)

Menu item Sub-menu item Sub-menu item Description
Print Quality Allow Color Printing Yes
No
Select the Yes option to allow the job to
print in monochrome (black and white) or
color depending on the job. This is the
default setting.
Select the No option to disable color
printing. All jobs will print in monochrome
(black and white). Some internal pages
will still print in color.
Color Calibration Calibrate Now
Power-On Calibration
Calibrate Now: Makes the product
perform a calibration immediately. If a job
is processing, the product calibrates after
the job is complete. If an error message
is displayed, you must clear the error first.
Power-On Calibration: Select how soon
the product should calibrate after you turn
it on. The default setting is the 15
minutes option.
Adjust Alignment Print Test Page
Adjust Tray <X>
Print Test Page: Print a test page that
tests product print alignment.
Adjust Tray <X>: Adjust the alignment of
the specified tray.
PowerSave Time Sleep Delay Off
1 minute
15 minutes
30 minutes
1 hour
2 hours
Sets how long the product remains idle
before it enters PowerSave mode. The
product automatically exits PowerSave
mode when you send a print job or press
a control-panel button.
The default setting is the 15 minutes
option.
Auto-Off Delay Never
1 hour
2 hours
4 hours
8 hours
24 hours
Select one of the time-period options to
set the amount of inactive time the
product will wait before shutting off as a
way to conserve energy.
Select the Never option to prevent the
product from shutting off after a given
amount of time. This is the default setting.
12 Chapter 2 Control panel ENWW