Print when cartridge is at estimated end of life – HP Color LaserJet Professional CP5225 Printer series User Manual
Page 92
Print when cartridge is at estimated end of life
A <Supply> Low message—where <Supply> is the color cartridge—appears when a print cartridge is
nearing the end of its life. A <Supply> Very Low message appears when the print cartridge is at its
estimated end of life. To ensure optimal print quality, HP recommends replacing a print cartridge when
the <Supply> Very Low message appears. Print-quality problems can occur when using a cartridge
that is at its estimated end of life, resulting in waste of print media and toner from other cartridges.
Replacing a print cartridge when the <Supply> Very Low message appears can prevent this waste.
The supply does not need to be replaced at this point in time unless the print quality is no longer
acceptable. Once an HP supply has reached “very low’, HP’s premium Protection Warranty on that
supply has ended.
WARNING!
Using the Continue setting can result in unsatisfactory print quality.
WARNING!
All print defects or supply failures incurred when an HP supply is used in continue at very
low mode will not be considered to be defects in materials or workmanship in the supply under the
HP Print Cartridge Warranty Statement. For warranty information, see
Print cartridge limited warranty
.
You can enable or disable the Continue feature at any time, and you do not have to re-enable it when
you install a new print cartridge. When the At Very Low menu is set to Continue, the product
automatically continues printing when a print cartridge reaches the recommended replacement level.
The <Supply> Very Low message appears while a print cartridge is being used in continue at very low
mode.
Enable or disable the continue at very low feature from the control panel
1.
On the control panel, press the
OK
button.
2.
Use the arrow buttons to select the System Setup menu, and then press the
OK
button.
3.
Use the arrow buttons to select the At Very Low menu, and then press the
OK
button.
4.
Use the arrow buttons to select the Black Cartridge menu or the Color Cartridge menu, and then
press the
OK
button.
5.
Select one of the following options.
●
Select the Continue option to enable the continue at very low feature.
●
Select the Stop option to disable the continue at very low feature.
●
Select the Prompt option to prompt the user to continue before the product will print the job.
●
Select the Print Black option (Color Cartridge menu only) to force the product to print with
only the black cartridge when one of the color cartridges reaches very low status.
80
Chapter 9 Manage and maintain
ENWW