HP LaserJet Pro 100 color MFP M175nw - Manual (Page 117)

4. Click the Automatic or Manual setting.
● Automatic setting: Select this setting for most color print jobs
● Manual setting: Select this setting to adjust the color settings independent from other
settings.
NOTE: Changing color settings manually can impact output. HP recommends that only
color graphics experts change these settings.
5. Click the Print in Grayscale option to print a color document in black and shades of gray. Use
this option to print color documents for photocopying or faxing. You can also use this option to
print draft copies or to save color toner.
6. Click the OK button.
Manual color options
Use manual color options to adjust the Neutral Grays, Halftone, and Edge Control options for text,
graphics, and photographs.
Table 9-1 Manual color options
Setting description Setting options
Edge Control
The Edge Control setting determines the rendering
of edges. Edge control has two components:
adaptive halftoning and trapping. Adaptive
halftoning increases edge sharpness. Trapping
reduces the effect of color-plane misregistration by
overlapping the edges of adjacent objects slightly.
● Off turns off both trapping and adaptive halftoning.
● Light sets trapping at a minimal level. Adaptive halftoning is on.
● Normal sets trapping at a medium level. Adaptive halftoning is
on.
● Maximum is the most aggressive trapping setting. Adaptive
halftoning is on.
ENWW Adjust color 103