HP LaserJet Pro 100 color MFP M175nw - Manual (Page 75)

Replacement instructions
Replace the print cartridges
When a print cartridge approaches the estimated end of its useful life, you can continue printing with
the current print cartridge until it no longer yields acceptable print quality.
Once an HP print cartridge has reached “very low’, the HP Premium Protection Warranty on that
supply has ended. All print defects or print cartridge failures incurred when an HP supply is used in
continue at very low mode will not be considered to be defects in materials or workmanship in the
supply under the HP Print Cartridge Warranty Statement.
1. Some error messages or status messages
cause the product to rotate the print cartridge
carousel to the affected cartridge
automatically. If the print cartridge that needs
to be replaced is not in the correct position,
press the Cartridge button to rotate the
print cartridge carousel to the cartridge color
that you want to replace.
NOTE: All doors must be closed when
pressing the Cartridge button. Also, the
imaging drum must be installed for the
Cartridge button to work.
NOTE: Wait until the Rotating message
and the rotation sounds stop before opening
the print cartridge door.
2. Open the print cartridge door.
ENWW Manage print cartridges and the imaging drum 61