HP LaserJet Pro 100 color MFP M175nw - Manual (Page 77)

8. Grasp the print cartridge by the center handle
and insert into the product.
NOTE: Compare the color label on the print
cartridge to the color label in the carousel slot
to make sure the print cartridge color matches
the carousel position.
CAUTION: If toner gets on your clothing,
wipe it off with a dry cloth and wash the
clothing in cold water. Hot water sets toner
into the fabric.
9. Close the print cartridge door.
NOTE: After closing the print cartridge door,
the control panel shows the Calibrating...
message. Allow a few minutes for the product
to calibrate.
NOTE: If replacing another print cartridge,
you must close the print cartridge door before
pressing the Cartridge button of the next
print cartridge.
You do not need to wait for the product to
calibrate when replacing the second print
cartridge. Instead, press the Cartridge
button to rotate the carousel into position.
After you have replaced the print cartridges,
the product calibrates.
NOTE: When printing, if you receive the status alert message Wrong Cartridge in <Color> Slot,
remove the print cartridge from the specified slot and compare the color label on the print cartridge to
the color label in the slot to determine the correct print cartridge for the slot.
ENWW Manage print cartridges and the imaging drum 63