HP LaserJet Pro 100 color MFP M175nw - Manual (Page 142)

Print information pages
Information pages reside within the product memory. These pages help diagnose and solve problems
with the product.
NOTE: If the product language was not correctly set during installation, you can set the language
manually so the information pages print in one of the supported languages. Change the language by
using the System Setup menu on the control panel.
Menu item Description
Demo Page Prints a color page that demonstrates print quality.
Menu Structure Prints a map of the control panel-menu layout. The active settings for each menu
are listed.
Config Report Prints a list of all the product settings. Includes network information when the
product is connected to a network.
Supplies Status Prints the status for each print cartridge, including the following information:
● Estimated percentage of cartridge life remaining
● Approximate pages remaining
● Part number
● Number of pages printed
● Information about ordering new HP print cartridges and recycling used HP
print cartridges
Network Summary Prints a list of all product network settings
Usage Page Prints a page that lists PCL pages, PCL 6 pages, PS pages, pages that were
jammed or mispicked in the product, monochrome (black and white) or color
pages; and reports the page count
HP LaserJet Pro 100 color MFP M175nw only: prints a page that lists the
information above, and the monochrome (black and white) or color pages printed,
number of memory cards inserted, number of PictBridge connections, and the
PictBridge page count
PCL Font List Prints a list of all the PCL fonts that are installed.
PS Font List Prints a list of all the PostScript (PS) fonts that are installed
PCL6 Font List Prints a list of all the PCL6 fonts that are installed
Color Usage Log Prints a report that shows the user name, application name, and color usage
information on a job-by-job basis
Service Page Prints the service report
Diagnostics Page Prints the calibration and color diagnostics pages
Print Quality Prints a color test page which can be useful for diagnosing print quality defects.
1. Press Setup button to open the menus.
2. Use the arrow buttons to select the Reports menu, and then press the OK button.
128 Chapter 12 Manage and maintain the product ENWW