Approach Tech NVR-2018 - Manual (Page 23)

21
4.2.4 Motion Detection
Take the steps detailed below to activate a programmed motion detection. For MOTION
SETTING, as well as its two distinct functions of MOTION ENABLE and SENSITIVITY / REGION,
please refer to section 5.4 for further details.
(1) Press the Setup button to enter the MAIN MENU .
(2) Select the item termed " LAN CAMERA " and press the Enter button to enter the
LANCAM SETTING page.
(3) Select the item termed " MOTION " and push the Enter button to enter the MOTION
SETTING page.
(4) To activate the motion detection function, set " MOTION ENABLE " to " ON ". To deactivate the
function, set " MOTION ENABLE " to " OFF " The items termed " OFF " and " ON " switch all the
channels in the MOTION ENABLE SETTING page off and on respectively as well. If you wish
to select individual channels for viewing, select the item termed " SET " and activates your
desired channels by pressing them " ON " while turning the rest " OFF ". Confirm your choices
by pressing " OK ". If not, push " CANCEL ".
(5) In the MOTION SETTING page, select the entry termed " SENSITIVITY / REGION " and press
the “>” button to show all the channels in their order, each in turn. Use the “ ^ ” button
and the “v” button to select a desired channel for setting. Press the Enter button and
set the channel in the SENSITIVITY / REGION SETTING page. Repeat the process for all
other channels you choose.
(6) To set " SENSITIVITY " and " REGION " for activation on the SENSITIVITY / REGION page,
choose your degree of sensitivity and then push the Enter button . At once the legends
" OK " and " CANCEL " appear at the bottom of the page. Now press the “<” button and the
“>” button to confirm either " OK " or " CANCEL " respectively.