Approach Tech NVR-2018 User Manual
Page 42
40
MAX REC RATE:
This option is used for limiting the number of pictures recorded every second into a storage disk.
The recording rate controls the maximum of the frequency at which the number of video pictures
can be recorded.
●
There are 4 different recording rates you can select from:
UNLIMIT, 30F/S, 20F/S,
and
10F/S.
NOTE: The maximum of pictures is averagely shared among all channels.
BANDWIDTH:
This option determines the bandwidth to be recorded. There are seven levels of bandwidth you
can select from:
50K
,
100K, 200K, 300K
,
400K, 500K,
and
UNLIMIT
. Selecting the
UNLIMIT
for
use provides bandwidth unlimited for each channel recorded images, and normally records
more images than a 50K, 100K, 200K, 300K, 400K and 500K. To regulate bandwidth, you can
use the “
^
” button
and the “
v
” button
to select any of the seven levels of bandwidth
provided here, ranging from the "
UNLIMIT
" to the "
50K
". If you select any of these levels, all
your channels will convert to that level. If, however, you wish to set individual channels in
different levels of bandwidth, please got to “
SET
” for this function. After set individual channels
in different modes and then push the
Enter
button
. At once the legends "
OK
" and
"
CANCEL
" appear at the bottom of the page. Now press the “
<
” button
and the “
>
” button
to confirm either "
OK
" or "
CANCEL
" respectively. Press "
OK
" to ratify your choice(s). If not,
press "
CANCEL
".
DISK FULL:
This option determines the way to utilize storage media in case of a full disk.
REWRITE:
When the hard-disk is full, the device continues recording by displacing the old data.
STOP:
When the hard-disk is full, the device will stop recording.