Network viewer and image viewer – Approach Tech NVR-2018 User Manual
Page 60
58
9. Network Viewer and Image Viewer
This section provides instructions for installing and using the Network Viewer, and Image Viewer, which are
included with the NVR. The programs can be operated by a selected PC equipped with the following
requirements.
1. Intel Pentium 233MHz at least.
2. 32 MB RAM
3. Window 95, 98, NT, and ME.
4. 4 MB Video card capable of 24-bit true color display.
5. 5 MB free hard-disk space for software installation.
6. 10-base T network for LAN operation.
9.1 The Network Viewer
9.1.1 Introduction to Network Viewer
The Network Viewer allows you to potentially access unit of the NVR from a remote desktop or a laptop in a
TCP/IP networking environment. It can perform the following functions.
View live images from the NVR
Store, search, and review recorded video from the NVR HDD.
Change the regular record, event record, and timer properties.
Before you are ready to view images from a desktop, you need to have your NVR networked by obtaining a
10 base Ethernet data cable (Standard RJ-45) to connect the NVR to your LAN/WAN. Now enter the main
menu to set the IP address.
RJ-45 PIN configuration for Ethernet
PIN NO.
PIN Assignment
1.
TX +
2.
TX -
3.
RX +
4.
Not Connected
5.
Not Connected
6.
RX -
7.
Not Connected
8.
Not Connected
NVR-2018
PC
RJ-45
1 2 3 4 5 6 7 8
RJ-45 socket