Approach Tech NVR-2018 - Manual (Page 43)

41
5.3 CLOCK / TIMER / SEQ SETTING
The NVR provides a weekly table, consisting of two periods of time each day for scheduled recording.
This option allows you to set the time each day that the NVR will start and stop recording.
CLOCK SETTING:
This entry allows users to set the system time.
NOTE: Clock data is retained for about 3 months after the 15-hour power supply is used up
(Operate On mode).
TIMER:
This entry allows users to program the time each day that the NVR will start and stop recording. There
are two time periods each day available for scheduling. The time is displayed in a 24-hour clock format.
If there is a time overlapping showing between two continual time period settings, the device will
automatically combine the two time-period settings into one combined time-period setting.
TIMER ENABLE: This option enables/disables the programmed scheduled recording.
ON: Enables the scheduled recording.
OFF: Disables the scheduled recording.
MAIN MENU
LAN CAMERA
RECORD / BANDWIDTH
CLOCK / TIMER / SEQ
ALARM
COMMUNICATION
DISK
SYSTEM
GOTO CLOCK / TIMER / SEQ PAGE
CLOCK / TIMER / SEQ
CLOCK SETTING : SET
TIMER : SET
SEQUENCER
: SET
MAIN PAGE
SET CURRENT CLOCK
REC SCHEDULE
TIMER ENABLE: ON
START END START END
S 06:00-16:00 12:00-18:00
●
●
●
●
REC SCHEDULE
TIMER ENABLE: ON
START END START END
S 06:00-18:00 00:00-00:00
●
●
●
●