Approach Tech NVR-2018 - Manual (Page 38)

36
IMAGE:
(1) Press the Setup button to enter the MAIN MENU .
(2) Select the item termed " LAN CAMERA " and press the Enter button to enter the
LANCAM SETTING page.
(3) Select the item termed " IMAGE " and push the Enter button to enter the IMAGE
SETTING page.
(4) To regulate the image resolution function, set the " RESOLUTION " either to " 352 x 240 ", or to
" 720 x 480 ". In either case, all channels will convert to your desired mode. If, however, you
wish to set individual channels in different modes, please select " SET " for this function. After
set individual channels in different modes and then push the Enter button . At once the
legends " OK " and " CANCEL " appear at the bottom of the page. Now press the “ < ” button
and the “ > ” button to confirm either " OK " or " CANCEL " respectively. Press " OK " to ratify
your choice(s). If not, press " CANCEL ".
(5) To regulate image quality, you can use the “ ^ ” button and the “ v ” button to select any
of the five levels of quality provided here, ranging from the " HIGHEST " to the " LOWEST ". If
you select any of these levels, all your channels will convert to that level. If, however, you
wish to set individual channels in different levels of quality, please got to “ SET ” for this
function. After set individual channels in different modes and then push the Enter button .
At once the legends " OK " and " CANCEL " appear at the bottom of the page. Now press the
“ < ” button and the “ > ” button to confirm either " OK " or " CANCEL " respectively. Press
" OK " to ratify your choice(s). If not, press " CANCEL ".