Approach Tech NVR-2018 - Manual (Page 85)

83
APPENDIX 1. –SCANIP
Follow the instructions below to use the SCANIP software to search the NVR devices from a local
location.
1. Click the button to discover the connection of the all-type device in the LAN. The
Device List will display the connection of the all-type device.
2. Select the desired device from the Device List .
3. Click the desired device to show the window while the NVR information acts to
display the desired changes instantly.
4. Do you want to execute auto search free IP?
If and when you want to auto search the free IP, select “Yes” or “No”. If clicked “Yes” the
software will provide the “Free IP Address” boxes on the right side of the window. If you click
“No”, these address boxes will not show.