Approach Tech NVR-2018 User Manual
Page 62
60
9.1.3 View the NVR video from a remote PC
Once Network View is executed a Login prompt will
appear, you must enter the default User Name:
admin
, password:
9999
into the respective field and
click on OK to log into the application.
Follow the instructions below to use the Network
Viewer to browse a NVR video from a remote
location. Upon entering the Network Viewer, the
connection box will appear as follows.
1. Click
the
Find
tag to connection of the all NVR device in the LAN.
2.
Choose a channel number from the Channel drop-down list.
3.
Type in the user name for the chosen NVR.
4.
Type in the password of the device and click the
Modify
tag to add the device to the Device List.
5.
Please repeat steps 2 to 4
again for another desire.
6.
Select the NVR to enter this device.
7. Click
the
Login
tag to begin viewing images.
NOTE: Upon connection, the connection status box indicates the name and IP address of the
selected device. If there’s a failure to connect, a “Fail” message appears on the screen
right after the device IP address; otherwise an “OK” appears. To add more connections or
units to the NVR, please repeat the above instructions.