Approach Tech NVR-2018 - Manual (Page 82)

80
12.3 Change Record / Alarm Setting
Please follow the steps given below to change the RECORD / ALARM setting through the network
as and when necessary.
1. Click the button on the home page to enter the setup mode.
2. Click the connection on the setting page to enter the RECORD / ALARM
setting page.
3. Adjust the Record / Alarm setting, including the “NORMAL REC SETTING RATE”, “ALARM
REC SETTING ENABLE”, and “ALARM REC SETTING RATE” as and when necessary.
4. Click the button to submit the new Record / Alarm setting.
5. Click the button to return to the home page while the new image setting acts on the
images to effect the desired changes instantly. (If the setting has not been changed by the
above steps, any (re)entry onto the home page will find images in their earlier or original
setting. )