Clinton Electronics CE-VF540 - Manual (Page 13)

9
3. Select a menu item from the list available by using the UP and DOWN
buttons.
• Functions are selected using up and down buttons.
• Place the cursor over a desired item, the selected position is displayed.
4. Set up a selected item by using the Left and Right buttons.
5. To finish the settings, select ‘EXIT’ and press the SET button.
Select the function
using the UP or
DOWN button.
Change the status
using the LEFT or
RIGHT button.
Notes
• An item with the icon also has sub menus. To select a sub menu, select
an item with the icon and press the SET button.
• An item with the - - - icon has no sub-menus available for selection.
When an arrow
is present, press
SETUP button to
enter sub-menu