Blc (back light compensation) – Clinton Electronics CE-VF540 User Manual
Page 19
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
15
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the
Up and Down buttons so that the arrow indicates ‘BACKLIGHT’.
2. Select a desired mode using the Left and Right buttons depending on the
camera purpose.
BLC : Enables a user to select a desired area on a picture and view that
area more clearly.
HLC (High Light Compensation) : If the scene contains extremely bright
light areas such as from car headlight, the light can mask out much of the
on-screen detail. Use HLC feature to remove these exceptionally bright lit
areas to allow detail such as car license plate number to become visible.
– LEVEL : Adjust level of the HLC function.
– LIMIT : Enable to change the operating condition.
– MASK COLOR/TONE : Change the color / brightness of the masking area.
(Black, Red, Blue, Cyan, Magenta)
– TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
BLC (Back Light Compensation)
BLC
ON
BLC
OFF