Dnr3 – Clinton Electronics CE-VF540 User Manual
Page 21
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
17
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ‘DNR’ by using the
Up and Down buttons so that the arrow indicates ‘DNR’.
2. Select a desired mode using the Left and Right buttons.
OFF : Deactivates DNR. Noise is not reduced.
ON : Activates DNR so that noise is reduced.
3. Set the DNR mode to ‘ON’ and press the SET button. Then you can adjust
the noise reduction level.
Notes
You cannot set the DNR to ‘ON’ or ‘OFF’ when the AGC mode of the
•
EXPOSURE menu is ‘OFF’.
When adjusting the noise reduction level in DNR mode, remember that the
•
higher the level is set, the greater the reduction in noise level, as will the
brightness of the image.
DNR3