Day/night – Clinton Electronics CE-VF540 User Manual
Page 22
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
18
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the
Up and Down buttons so that the arrow indicates ‘DAY/NIGHT’.
2. Select a desired mode using the Left and Right buttons according to the
picture display you want.
EXTERN : This mode allows you to apply a desired filter to external signals.
COLOR : The picture is always displayed in color.
B/W
: The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
AUTO : The mode is switched to ‘Color’ in a
normal environment, but switches
to ‘B/W’ mode when ambient
illumination is low. To set up the
switching time for AUTO mode,
press the SET button. You can
turn on or off the burst signal on
B/W mode.
– DWELL TIME : You can select the duration time about changing the
day/night mode. (3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s)
Day/Night
Notes
When using a Video Auto Iris Lens, if you set the lens level to low, automatic
•
switching between Color and Black & White may not occur.
When AGC in the EXPOSURE menu is ‘OFF’, ‘ --- “ mode operates as like
•
selecting ‘COLOR’ mode, and ‘AUTO’ mode can not be selected.